Features:
The tough resin is specially designed for UV curing LCD 3D printers, short curing time, no deformation during molding, smooth surface and high precision.
The finished product has good strength and flexibility, excellent molding and impact resistance, and has certain elasticity.
Practical material for 3D printers, widely used in watches, glasses, teaching and research, toy design, handicraft design, industrial parts design, etc.
Low skin irritation(P.I.I≤0.9), high LD50(LD50≥18000mg/kg), low-odor and safer.
500g bottled, convenient for storage and carry.
Specifications:
Color: White/Black/Grey/Beige/Pink/Green/Blue/Yellow/Orange/Aqua Blue/Clear/Transparent Green/Transparent Red/Clear/Bright Red/Metallic Silver(Optional)
Apply: For LCD 3D Printer
Solidify Wavelength: 355nm to 410nm
Viscosity (25℃,NDJ-8S): 150 to 300MPa.s
Density: 1.05to 1.25g / cm3
LD50≥18000mg / kg
Size: 500g / 17.6oz
Item Weight: 574g / 20.2oz
Package Size: 23.8 * 11.5 * 11cm / 9.4 * 4.5 * 4.3in
Package Weight: 695g / 24.5oz
Parameters of Finished Product
Flexural Modulus: 1.882-2.385Mpa
Flexural Strength: 59-70MPa
Heat Distortion Temperature: 80°C
Thermal Expansion Coefficient: 95 * E-6
Shrinkage of Vol.: 3.72-4.24%
Shrinkage of Linear: 1.05-1.35%
Tensile Strength: 36-52MPa
Tensile Modulus: 1.779-2.385MPa
Elongation at Break: 11%-20%
Hardness(D): 84D
Glass Transition Temperature: 100°C
Density: 1.05-1.25g / cm3
Notch Impact Strength: 44-49j / m
Skin Irritation: P.I.I ≤ 0.9
Note:
1. The product is for one-time use and can not be reused.
2. Please shake the resin and place it for 30 minutes before use. Stating for 30 minutes eliminates bubbles generated during shaking.
3. Wear mask and gloves before use to avoid direct contact with the skin and keep the room ventilated, protective measures should be taken and thoroughly cleaned after operation.
4. It is recommended that ambient temperature be controlled at 25-30℃, to avoid direct light during use.
5. Store under cool, shade and dry environment without direct, recommended storage environment temperature of 25-30℃.
6. Abandoned bottle should be disposed of in accordance with local environmental regulations.
7. Due to light, screen resolution and other factors, there will be some differences between the actual color and the picture display color of the finished products. Please understand. Thank you.
Package List:
1 * Bottle Resin Material