Designed for lead-acid batteries, lithium batteries, solar cells or power booster to boost electric vehicles, cell charging, and has powerful functions.
Features:
With the airfoil, the heat dissipation is very fine, the output power is greater.(48V input plus fan power can be around 1800W when the fan is added).
The temperature control fan, combined with the hydraulic bearing fan, is well balanced on the noise and heat dissipation. When the load is light, the fan does not rotate, and the load temperature reaches about 60 degrees, and the fan automatically turns. It can effectively reduce noise and prolong life.
The main power pipe insulation board uses high grade alumina, and the thermal conductivity is 10 times as high as the ordinary insulation pad.
Using 100V 210A TO-247 large package power tube, the power allowance is large and the dynamic response is fine.
The double large size iron silicon aluminum magnetic ring, 4 1.2 pure copper enameled wire and Rao, low heat, high efficiency.
New design, the conversion efficiency is up to 98.1%.
The brand 3296W multi loop potentiometer has high adjustment precision and small drift.
Copper wire output current sampling, constant current steady temperature drift small.
Undervoltage protection is adjustable, it can effectively protect all kinds of batteries, and can also be used in solar cells.
With constant current function, it can be used to boost the cell car, charge the battery and so on.
3 20A fuses are connected in parallel, which can protect the risk of accidental short circuit of output.
Three indicator lights: undervoltage, over current, power indicator, working state at a glance.
High frequency capacitance is used in both input and output. The output ripple is low, heat is small, and the life is long.
The MLCC ceramic capacitor is added to the input and output, the output ripple is obviously reduced, and about 100 mV at the time of 48V to 72V 4A.
Specifications:
Power: 1500W, 1800W (optional)
Input Voltage Range: 10-60V
Output Voltage Range: 13-97V
Item Size: 130 * 80 * 51mm / 5.1 * 3.1 * 2.0in
Package Size: 150 * 100 * 70mm / 5.9 * 3.9 * 2.8in
Package Weight: 430g / 0.9lb
Pin mode:
IN input cathode, anode, cathode OUT IN input output, OUT negative output.
Notes:
Please allow 1-30mm error due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Package List:
1 * Booster