Features:
- Large LCD Screen: Full LCD display for easy reading (display parameters of voltage, current, power and electricity quantity at the same time).
- Electricity Parameter Measurement: Measuring voltage, current, power and electric quantity.
- Voltage Alarm Function: When the voltage exceeds the alarm threshold, it will be prompted by backlight and flickers.
- Power Down Data Storage Function
- Power Button Reset Function
- Backlight Function
Button Usage:
1. Backlight Control:
Short press the button to turn on or off the backlight, and the backlight status will automatic store after power off.
2. Power Cleared:
(1) Press the button until the power display area shows "CLr" character, and then release the button.
(2) The indicator light flashes, indicating that the electricity quantity of the battery is in the state of zero clearing; if you press the button again, the electricity quantity data will be cleared and then it will automatically exit the flashing status of clearing.
(3) If there is no operation within 5 seconds, it means that the electricity quantity data is not cleared and it will exit automatically.
3. Voltage Alarm Value Setting:
(1) Press the button until the power display area shows "SET" character, and then release the button.
(2) At this moment, the current high voltage alarm value is displayed in the voltage area, and the current low voltage alarm value is displayed in the current area. The least significant bit starts to flash. You can short press the key for +1 operation. When there is no operation for more than 3 seconds, it will automatically switch and adjust the low position. There are 6 bits from high voltage alarm value to low voltage alarm value, and the range of voltage alarm threshold value is 6.5~99.9V.
(3) After setting, long press the button until the screen displays "PASS" character, indicating that the setting is successful and then it will automatically exit the setting mode.
4. Range Selection:
(1) Press the button until the power display area shows "Curr" character, and then release the button.
(2) At this moment, the current area displays "100A", you can short press the button to switch "100A" and "50A" to represent the range of external shunt(100A/75mV or 50A/75mV). (Note: This meter can only use these two types of shunts.)
(3) Long press the button until exiting the setting mode or it will automatically saved and exit if there is no operation over 3 seconds.
Specifications:
Material: ABS
Color: Black
Test Range:
(1) Power: 0~10kW
Within 1kW: The display format is 0.0~999.9W;
Above 1kW: The display format is 1000~9999W.
(2) Electricity: 0~9999kWh
Within 10kWh: The display format is 0~9999Wh;
Above 10kWh: The display format is 10~9999kWh.
(3) Voltage: 6.5~100V
Display format: 6.50~99.99V
(4) Current: 0~100A
Display format: 0.00~99.9A
Item Size: Approx. 8.8*5*2.5cm / 3.46*1.97*0.98in
Item Weight: Approx. 146.3g / 5.16oz
Package Size: Approx. 11*7*3.5cm / 4.33*2.76*1.38in
Package Weight: Approx. 163.3g / 5.76oz
Note:
Please read the Users Manual before use.
Packing List:
1 * Power Meter
1 * Shunt
1 * Users Manual(English)