This is a dual impedance true RMS digital multimeter integrating a variety of measurements like AC/DC voltage, AC/DC current, frequency, duty ratio, resistance, capacitance, temperature, diode, continuity, NCV, VFD, inrush current, etc.. And there are more functions like last data hold, flashlight, Max./Min./Relative value, Celsius/Fahrenheit degree, and zero key.
Features:
CLAMP MULTIMETER: Measures inrush current, VFD current/voltage, AC/DC current, AC/DC voltage, frequency, duty ratio, resistance, continuity, diode, capacitance, temperature, non-contact AC voltage (NCV) detection, and live detection.
WIDE OPENING JAW: Opening jaw capacity is 40mm, wide enough to measure without disturbing the circuit.
LOUD BEEP: NCV sensor send out audible and visual alarm once received electromagnetic signal.
MORE FUNCTIONS: Features data hold, flashlight, low battery display, Celsius/Fahrenheit degree, Max./Min./Relative value, and Zero(reset) key.
SAFE TO USE: Designed and conforms to IEC61010-1, CAT III 1000V, safe and reliable.
AUTO-OFF: Auto power off within 15 minutes if there is no operation, helps conserve the battery.
MULTI TESTER: Comes with 2 test leads and a thermocouple to be used as a multitester.
Note:
*MUST read the user manual carefully before use for safety.
*Battery not included.
Parameters:
Display: 6000 count
Clamp Opening Size: 40mm
Auto-off: approx. 15 minutes
Max. Voltage Between Terminals and Earth Ground: AC750V or DC 1000V
| Range |
Resolution |
Accuracy |
| DC Current (MAX current: 1000A) |
| 60A |
0.01A |
±(2.5%reading+8) |
| 600A |
0.1A |
| 1000A |
1A |
AC Current (MAX current: 1000A, True RMS)
Frequency range: 0.1~600A: 40Hz~400Hz
600~1000A: 40Hz~60Hz |
| 60A |
0.01A |
±(2.5%reading+8)
VFD: ±(5.0%reading+10)
INRUSH: ±(5.0%reading+10) |
| 600A |
0.1A |
| 1000A |
1A |
DC Voltage
Input impedance: 10MΩ(LoZ: 300kΩ)
Overload protection: AC750V/DC1000V
Maximum input voltage: AC750V/DC1000V |
| 600mV |
0.1mV |
±(0.5%reading+5) |
| 6V |
0.001V |
| 60V |
0.01V |
| 600V |
0.1V |
| 1000V |
1V |
±(0.8%reading+5) |
AC Voltage
Input impedance: 10MΩ(LoZ: 300kΩ)
Overload protection: AC750V/DC1000V
Maximum input voltage: AC750V/DC1000V
Frequency range: 40Hz~1kHz, True RMS |
| 600mV |
0.1mV |
±(0.8%reading+5) |
| 6V |
0.001V |
| 60V |
0.01V |
| 600V |
0.1V |
| 750V |
1V |
±(1.0%reading+5) |
| VFD(750V) |
0.1V |
±(2.0%reading+5) |
Resistance
Overload protection: 250V |
| 600Ω |
0.1Ω |
±(1.0%reading+5) |
| 6kΩ |
0.001kΩ |
| 60kΩ |
0.01kΩ |
| 600kΩ |
0.1kΩ |
| 6MΩ |
0.001MΩ |
| 60MΩ |
0.01MΩ |
| Diode |
It displays the approximate forward voltage value of the diode. |
Forward DC current is about 1.5mA;
Reverse DC voltage is about 3V;
Overload protection: 250V |
| Continuity |
<approx. 30Ω, the buzzer sounds and the LED light on |
Test Voltage Approx. 1V
Overload protection: 250V |
Capacitance
Overload protection: 250V |
| 10nF |
0.001nF |
±(4.0%reading+5) |
| 100nF |
0.01nF |
| 1000nF |
0.1nF |
| 10μF |
0.001μF |
| 100μF |
0.01μF |
| 1000μF |
0.1μF |
| 10mF |
0.001mF |
| 100mF |
0.01mF |
±(5.0%reading+10) |
Frequency/Duty Ratio
Overload protection: 250V |
| 10Hz |
0.001Hz |
±(1.0%reading+3) |
| 100Hz |
0.01Hz |
| 1000Hz |
0.1Hz |
| 10kHz |
0.001kHz |
| 100kHz |
0.01kHz |
| 1000kHz |
0.1kHz |
| 10MHz |
0.001MHz |
±(3.0%reading+3) |
| 1~99% |
0.1% |
Temperature
*The below precision does not inlcude the error of thermocouple probe. |
| ℃ |
1℃ |
±3℃ (-20℃~0℃) |
| ±1.0% or ±2℃ (0℃~400℃) |
| ±2.0% (400℃~1000℃) |
| ℉ |
1℉ |
±6℉ (-4℉~32℉) |
| ±1.0% or 4℉ (32℉~752℉) |
| ±2.0% (752℉~1832℉) |
Specifications:
Brand: HABOTEST
Material: ABS
Color: Black and Red
Battery: 2pcs, 1.5V, AAA alkaline battery (batteries not included)
Item Size: 24*8*4.5cm / 9.44*3.14*1.77in
Item Weight: 311g / 10.97oz
Package Size: 27.5*13.5*5.5cm / 10.82*5.31*2.16in
Package Weight: 620g / 21.86oz
Packing List:
1 * Digital Clamp Meter
1 * Thermocouple
2 * Test Lead
1 * User Manual(English)